Nortel Networks NN43001-563 Add an IP Trunk 3.01 (and later) node on TM 3.1 by retrievingan existing node

Add an IP Trunk3.01 (and later) node on TM 3.1 by retrieving an existing node 353

Add an IP Trunk 3.01 (and later) node on TM 3.1 by retrievinganexisting node

After an IP Trunk3.01 (and later) node is manually conﬁgured and installed,

that node can be added to another TM 3.1 PC by retrieving the conﬁguration

data from the existing IP Trunk3.01 (and later) node.

Use this optional procedure to perform the following actions:

•Tocombine existing IP Trunk 3.01 (and later) nodes on the network

that were originally conﬁgured from different TM 3.1 PCs onto one TM

3.1 210 PC to manage the IP Trunk 3.01 (and later) network from a

single point of view.

•Torestore the IP Trunk 3.01 (and later) conﬁguration database to an TM

3.1 PC whose hard drive had failed. (The TM 3.1 IP Trunk 3.01 (and

later) nodes can also be restored from the Full TM 3.1 Backup.)

•Totemporarily create a copy of the IP Trunk 3.01 (and later) node

conﬁguration on another PC for maintenance and diagnostic purposes.

For example,a copy of an IP Trunk3.01 (and later) node database can

be created on an TM 3.1 PC located at a remote technical support

center.

The site name, Meridian 1 system name, and Meridian 1 customer number

must exist in the TM 3.1 Navigator beforea new IP Trunk 3.01 (and later)

node can be added. Multiple IP Trunk 3.01 (and later) nodes can be added

in the TM 3.1 ITG ISDN IP Trunksapplication for each Meridian 1 customer.

If multiple TM 3.1 PCs are used to manage the same IP Trunk 3.01 (and

later) network and the PCs are not using ﬁle-sharing, caution must be taken

to synchronize the differentcopies of the IP Trunk 3.01 (and later) database.

Use the TM 3.1 ITG menu Conﬁguration > Synchronize > Retrieve

function to synchronize the TM 3.1 IP Trunk3.01 (and later) database with

the IP Trunk3.01 (and later) node’s database.

Follow the steps in Procedure 56 "Retrieving and adding an IP Trunk3.01

(and later) node for administration purposes" (page 353) to retrieve and add

an IP Trunk3.01 (and later) node for administration pur poses.

Procedure 56

Retrieving and adding an IP Trunk3.01 (and later) node for administration

purposes

Step Action

1Double-click the ITG ISDN IP Trunksicon from the Services folder.

The IP TelephonyGateway - ISDN IP Trunk window opens.

Nortel Communication Server 1000

IP TrunkFundamentals

NN43001-563 02.01 Standard

Release 5.5 21 December 2007