IP Trunk3.01 (and later) upgrades 415
click the Configuration tab. "S/W version" displays the current
software version as read from the IP trunk card.
4From the main card list view, select the cards to be upgraded.
Upgrade all cards in the node together, unless installing a spare card
that has older software.
5Todisable all IP trunk cards to be upgraded, use one of the following:
•the LD 32 DISI command from the TM 3.1 Maintenance windows
•the TM 3.1 System Passthru terminal
•a system management terminal directly connected to a TTY port
on the system
6In the TM 3.1 IP Telephony Gateway Main window,select
"View/Refresh" and verify that the card status isshowing "Disabled."
7Select menu Configuration > Synchronize > Transmit.
An ITG – TransmitOptions dialog box is displayed.
8In the TransmitOptions group box, select the radio button "Transmit
to selected cards."
9In the Software Download group box, check "Card software."
10 Click the Browse button to locate the IP Trunk3.01 (and later) IP
trunk card software downloaded earlier to the TM 3.1 PC hard drive.
Select the software file and click "Open"to save the selection. The
path and file name of the IP Trunk 3.01 IP trunk card software
appears in the edit box next to the Browsebutton.
11 Click the Start Transmitbutton to begin the IP trunk card software
upgrade process.
The software is transmitted to each card in turn and is burned into
the flash ROM on the IP trunk card.
Monitor the status in the Transmit Control window. Con���rm that
the IP trunk card software is transmitted correctly to all cards. Note
any error messages. Examine and correct any problems. Repeat
IP trunk card software transmission until it is completed correctly
on each IP trunk card. The IP trunk cards continue to run the old
software until they are rebooted.
12 Reboot each IP trunk card that received transmitted software, so that
the new software can take effect. Start the rebooting with Leader 0,
then Leader 1, and lastly the Follower cards. After all the IP trunk
cards have been reset and have correctly rebooted, they respond to
Nortel Communication Server 1000
IP TrunkFundamentals
NN43001-563 02.01 Standard
Release 5.5 21 December 2007
Copyright© 2007, Nor tel Networks
.