406 Maintenance
Command Description
setLeader IP address, IP
gateway, subnet mask The one command that does all the necessary actions to make
a Leader. Sets IP address, gateway, subnet mask, boot method
to static, and Leader bit in NVRAM.
Example: ITG> setLeader "47.23.45.67", "47.0.0.1", "255.255.240.0"
clearLeader The one command that does all the necessary actions to clear
the Leader information in NVRAM and set the boot method to
use BOOTP, thus, making the card a Follower.
Example: ITG> clearLeader
Tabl e 64
DSP commands
Command Description
DSPReset DSP Number Reset the indicated DSP.
Example: ITG>DSPReset 0
DSPSelfTest DSP Number Run self-test on the DSP.
Example: ITG>DSPSelfTest 0
DSPNumShow Print number of DSPs on IP trunk card.
Example: ITG>DSPNumShow
DSPPcmLpbkTestOn Start PCM loopback test on the indicated DSP.
Example: ITG>DSPPcmLpbkTestOn
DSPPcmLpbkTestOff Stop PCM loopback test on the indicated DSP.
Example: ITG> DSPPcmLpbkTestOff
DSPSndLpbkTestOn Start Send loopback test on the indicated DSP.
Example: ITG> DSPSndLpbkTestOn
DSPSndLpbkTestOff Stop Send loopback test on the indicated DSP.
Example: ITG> DSPSndLpbkTestOff
DSPRcvLpbkTestOn Start Receive loopback test on the indicated DSP.
Example: ITG> DSPRcvLpbkTestOn
DSPRcvLpbkTestOff Stop Receive loopback test on the indicated DSP.
Example: ITG> DSPRcvLpbkTestOff
Nortel Communication Server 1000
IP TrunkFundamentals
NN43001-563 02.01 Standard
Release 5.5 21 December 2007
Copyright© 2007, Nor tel Networks
.