Install NTMF94EA and NTCW84KA cables 195
Figure 35
NTCW84JA 50 pin I/O Panel Filter Connector Block
Even though the ITG-Pentium 24-port trunk card is a two-slot card, only
the leftmost slot is counted for the card slot number. Example: for an
ITG-Pentium 24-port trunk card installed in slots 2 and 3, the slot number
is 2.
For more detailed cabling information and procedures for replacing the
NT8D81BA with the NT8D81AA, see Appendix "Patches and advisements"
(page 431).
Install NTMF94EA and NTCW84KA cables
The Media Card 32-port and ITG-Pentium 24-port trunk card supports a
one-cable solution for access to the TLAN network interface, ELAN network
interface, and serial ports. The ELAN network interface supports 10BaseT
operation and the TLAN network interface supports 10/100BaseT operation.
If using a 100BaseT operation on the TLAN network interface, install a
NTCW84JA 50-pin I/O panel filter connector block to replace the standard
I/O connectors provided.
Cables that are provided forthe ELAN and TLANnetwork interface functions
include the following:
the NTMF94EA ELAN, TLAN, and RS-232-port cable (for non-DCHIP
cards)
the NTCW84KA ELAN, TLAN, RS-232 and DCH Ports cable (for DCHIP
cards)
Nortel Communication Server 1000
IP TrunkFundamentals
NN43001-563 02.01 Standard
Release 5.5 21December 2007
Copyright© 2007, Nor tel Networks
.