272 Install and configure IP Trunk3.01 (and later) node
Figure 62
esn5PrefixShow
4At the ITG prompt, enter >esn5PrefixSet "1xx" where xx = the NCOS
value. In Figure 63 "esn5PrefixSet" (page 272), the default value
was changed from NCOS 00 to 03.
Figure 63
esn5PrefixSet
—End—
Check and download IP trunk card software in TM 3.1
Follow the steps in Procedure 35 "Checking the IP trunk cards software
version" (page 272) to check the software version of the IP trunk cards in
a new IP Trunk3. 0 node. All cards must have same version. To ensure
proper IP Trunk3.01 (and later) network operation,Nortel recommends that
all network nodes have the same software version. Verify that the software
release on each card is the latest recommended software release for IP
Trunk3.01 (and later) by connecting to a Nor tel website that contains the
latest software versions for the Media Card 32-port and the ITG-Pentium
24-port trunk card.
Procedure 35
Checking the IP trunk cards software version
Step Action
1From the IP TelephonyGateway - ISDN IP Trunk window, click
the new node.
2For each card in the node, starting with Leader 0, double-click the
card entry in the lower half of the window. The Card Properties
window appears.
Nortel Communication Server 1000
IP TrunkFundamentals
NN43001-563 02.01 Standard
Release 5.5 21 December 2007
Copyright© 2007, Nor tel Networks
.