Add an IP Trunk3.01 (and later) node 311
19 Click OK to complete the node provisioning. The ITG Node
Properties window closes. The node data is now displayed in the
ITG – ISDN IP Trunk window. See Figure 101 "ITG, ISDN IP Trunk
window with new node displayed" (page 311).
Figure 101
ITG, ISDN IP Trunk windowwith new node displayed
—End—
Edit a node
Follow the steps in Procedure 46 "Editing a node" (page 311) to edit a
node’s information.
Procedure 46
Editing a node
Step Action
1In the TM 3.1 Navigator window, under Services, right-click ITG
ISDN IP Trunks. A drop-down list appears.
2Click Open. See Figure 91 "TM 3.1 Navigator ITG ISDN IP Trunks
service" (page 301).
The IP Telephony Gateway– ISDN IP Trunk window opens, as
seen in Figure 92 "ITG ISDN IP Trunk window" (page 302). The
smaller upper window lists the systems. The larger lower window
lists all the cards in the selected system’s node.
3In the window, selectthe node to be edited from the list. From the
upper menu, click Configuration > Properties. See Figure 102
"Change node properties" (page 312).
Nortel Communication Server 1000
IP TrunkFundamentals
NN43001-563 02.01 Standard
Release 5.5 21 December 2007
Copyright© 2007, Nor tel Networks
.