Software delivery 55
Installation guidelines
Use the following guidelines when installing the Media Card 32-port trunk
card:
Ensure CS 1000 Release 4.0 or later software is installed and running.
Ensure that the NTVQ01BB Media Card Firmware is version 8.0 (or
later)
Order the Alarm and Notification application package separately.
For all MCDN features, the SDI/DCH NTAK02card (Small Systems)
or the MSDL NT6D80 card (Large Systems) is required. These cards
must be ordered for each system.
For Large Systems which include the NT8D81AB moulded Tip/Ring
Backplane cable, replace it with the NT8D81AA non-moulded version
cable for 100BaseT operation. For more information on installation of
the new filter block, referto "Install NTCW84JA Large System I/O Panel
50-Pin filter adapter" (page 193).
A security dongle and keycode mechanism are not required on the
Media Card 32-port trunk card.
The new Option11C Cabinet door and grill (which allows more space
between the door and the cards) is required due to the space needed by
the DCHIP faceplate assembly. A cabinet upgrade kit, NTDK18AA, is
availablefor the following cabinets: NTAK11xCor earlier, and NTDK50.
A maximum of ten Media Card 32-port trunk cards can be installed in
a Large System cabinet for Class B compliance (EN55022:1998 and
EN55024:1998). There are no limitations on the number of Media Card
32-port trunk cards that can be installed in other Meridian 1/CS 1000M
systems.
Software delivery
The IP Trunk 3.01 softwareapplication is provided on the onboard
CompactFlash card for the Media Card 32-port trunk card.
A programmed CompactFlash (NTM405AB) card is shipped along with
every IP Trunk3.01 system package card. The CompactFlash must be
installed on the Media Card 32-port trunk card.
ATTENTION
IMPORTANT!
The software is downloadablefrom the Nor tel website and is availableto IP Trunk
customers free of charge.
Nortel Communication Server 1000
IP TrunkFundamentals
NN43001-563 02.01 Standard
Release 5.5 21December 2007
Copyright© 2007, Nor tel Networks
.