182 Install and configure IP Trunk3.01 (and later) node
Step Procedure See
page
"Exit node property configuration session" (page 252).
"Createthe IP Trunk 3.01 (and later) node dialing plan using TM 3.1" (page 253).
"Retrieve the IP Trunk 3.01 (and later) node dialing plan using TM 3.1" (page
258).
5"Transmit IP trunk card configuration data from TM 3.1 to the IP trunk cards"
(page 260).
"Configure the Leader 0 IP address" (page 260).
"Transmit the node properties, card properties and dialing plan to Leader 0"
(page 264).
"Verify installation and configuration" (page 266).
"Transmit card properties and dialing plan to Leader 1 and Follower cards"
(page 268).
6"Configure date and time for the IP Trunk 3.01 (and later) node" (page 269).
7"Changethe default ITGshell password to maintainaccess security"(page 270).
8"Check and download IP trunk card software in TM 3.1" (page 272).
"Transmit new software to the IP trunk cards" (page 274).
"Upgrade the DCHIP PC Card" (page 276).
9"Configure TM 3.1 Alarm Management toreceive SNMP traps from the IP trunk
cards" (page 277).
10 "Make test calls to the remote nodes (ITG Trunk or IP Trunk)" (page 280).
ESN installation summary

The following is a summary of the actions required to implement ESN:

In LD 86, provision the ESN block.

Enter the maximum numbers of each type of ESN entity.

Indicate whether CDP is enabled or disabled.

Enter the ESN access codes.

In LD 86, provision any DGT (Digit manipulation tables) required.

Nortel Communication Server 1000
IP TrunkFundamentals
NN43001-563 02.01 Standard
Release 5.5 21 December 2007
Copyright© 2007, Nor tel Networks
.