482 Appendix G Upgrade an ITG Trunk1.0 node to support ISDN signaling trunks
Figure 157
Software download example
9Toverify the software upgrade on Leader 0, telnet to the IP address
of the Leader 0 card. Leader 0 is the only card that has an IP
address configured at this stage of the upgrade. Enter the following
command:
ITG> swVersionShow
10 Configure the ITG Trunk2.0 data on the TM 3.1 ITG ISDN IP Trunk
application. "Configure IP Trunk3.01 (and later) data in TM 3.1"
(page 236)
11 Transmitconfiguration data to the upgraded ITG 8-por t trunk cards
using normal ITG Trunk2.0 installation procedures.
12 Upgrade Meridian 1 to Release 25 software.
—End—
Remove ITG Trunk 1.0 configuration data from Meridian 1
Followthe steps in Procedure 84 "Removingthe ITG Trunk1.0 configuration
data from Meridian 1" (page 483) to remove the ITG Trunk1.0 configuration
data from Meridian 1.
Nortel Communication Server 1000
IP TrunkFundamentals
NN43001-563 02.01 Standard
Release 5.5 21 December 2007
Copyright© 2007, Nor tel Networks
.