Add an IP Trunk3.01 (and later) node 305
Voice LAN gatewayIP – the lowest IP address on the TLAN
subnet
Card TN – the first three numbers (loop/shelf/card). The
exception is the Meridian 1 Option 11C Cabinet and CS 1000M
Cabinet which is only "card".
Card density – 24- or 32-port IP trunk card
D-channel – the D-channel on the system. If the D-channel card
resides on this IP trunk card, check the DCHIP box.
Protocol – the local protocol. For IP Trunk 3.01 (and later) to
interwork with CS 1000M, the protocol must be SL1 or SL1 with
ESN, as H.323-compatible gatewaysdo not understandQSIG.
The QSIG checkbox enables IP Trunk3.01 to be configured with a
QSIG channel address length of 7 bits for Primary Rate D-Channels
or 8 bits for an ISL D-Channel used in prior releases of IP Trunk
software. The QSIG checkbox is checked or unchecked by default,
depending on the software release running on the system. The
checkboxis enabled only when the selected protocol is QSIG (ESGF
or ISGF) and the node version is IP Trunk3.01.
First CHID 0 – the first channel number. All other channels
autonumber in increasing order.
11 Click Add to define the card.
Clicking Add does not add the D-channel or card to the system;
it only adds the IP trunk card information. The system must still
be provisioned separately.
When Add is clicked, the lower card information window displays the
savedcard information. See Figure 96 "New ITG Node Configuration
tab window with Leader 0 provisioned" (page 306).
Nortel Communication Server 1000
IP TrunkFundamentals
NN43001-563 02.01 Standard
Release 5.5 21 December 2007
Copyright© 2007, Nor tel Networks
.