Schneider Electric 58 TRX manual 117

	Altivar® 58 TRX AC Drives
	Type H Specifications
Electrical Specifications (Continued)
Analog output AO1	X–Y mA analog output, with X and Y programmable from 0–20 mA.
	Factory setting: 0-20 mA.
	Maximum load impedance: 500 Ω
	Resolution: 0.04 mA (9 bits)
	Linearity: +/- 0.2 mA
	Accuracy: +/- 0.2 mA
	The analog output is updated every 2 mS, maximum.
Logic inputs LI	4 assignable logic inputs with impedance 3.5 kW, compatible with PLC level
	1, standard IEC 60065A-68.
	Maximum length of shielded cable: 100 m (328 ft).
	Power supply + 24 Vdc (minimum 11 Vdc, maximum 30 Vdc).
	State 0 if < 5 Vdc, state 1 if ≥ 11 Vdc.
	Sampling time: 2 ms maximum.
	Other inputs: see option cards.
Logic outputs LO	2 relay logic outputs for R1 (fault relay) and R2 (assignable).
	Form C, 1 N.O., 1 N.C. contact protected against overvoltages (relay R1).
	1 N.O. contact protected against overvoltages (relay R2).
	Minimum switching capacity: 10 mA for 24 Vdc.
	Maximum switching capacity: on a resistive load (cos ϕ = 1): 5 A for 250 Vac
	or 30 Vdc; on an inductive load (cos ϕ = 0.4 and L/R = 7 ms): 1.5 A for 250
	Vac or 30 Vdc.
	Other outputs: see option cards
Communication	RS 485 multidrop serial link with simplified Modbus protocol as part of the
	standard product.
	Transmission speed: 19200 bps, no parity
	Use: connecting a terminal (option), microprocessor card, a PC (option), or
	connecting one or more PLCs.
Codes and standards	UL Listed per UL 508C as incorporating electronic overload protection:
	UL File E164874 CCN NMMS
	ATV58HU09M2 to D46M2
	ATV58HU18N4 to D79N4
	ATV58HC10N4X to C33N4X
	CSA Certified to CSA C22.2 No. 14.
	CSA File LR96921 Class 3211 06
	ATV58HU09M2 to D46M2
	ATV58HU18N4 to D79N4
	CE Marked
	Conforms to applicable NEMA ICS, NFPA, IEC, and ISO 9001 standards.

117

09/2003 © 2000–2003 Schneider Electric All Rights Reserved