Line Contactor, Omit Keypad Display | Schneider Electric 58 TRX

Class 8839 Econoflex™ AC Drives

Factory Modifications

FACTORY MODIFICATIONS (CONTINUED)

Miscellaneous Options

	Mod	Description

		Line Reactor
		Includes an integrally-mounted AC line reactor factory-
		installed and -wired between the circuit breaker disconnect
	A09	means and the power converter for high-true power factor
	A09	and effective harmonic mitigation. It complies with IEEE 519

		guidelines. Optional for 1 to 20 HP 460 Vac and 1 to 10 HP
		208/230 Vac models, but included for 25 to 100 HP 460 Vac
		and 15 to 50 HP 208/230 Vac models.

		Line Contactor
	B09	Provides a line contactor factory-wired between the circuit
	B09	breaker disconnect (or line reactor, when provided) and the
		breaker disconnect (or line reactor, when provided) and the
		power converter.

		3 to 15 PSI Transducer with Digital Display
	C09	Provides the controller with the capability to follow a user
	C09	supplied 3 to 15 PSI follower signal. The module is calibrated

		to operate as a 4-20 mA DC follower for the power converter.

		Omit Keypad Display
	D09	Omits keypad display from the door of the controller. A
	D09	separate keypad must be ordered to program the drive
		separate keypad must be ordered to program the drive
		controller.

		Smoke Purge
		Provides smoke purge operating mode controlled by a user-
		supplied 120 Vac signal. When power is supplied to the user-
	E09	supplied contact, motor operation is transferred to:
		• 60 Hz operation if Power Circuit W is supplied.
		• Bypass across the line operation if Power Circuit Y is
		supplied.

		22 kAIC UL Coordinated Rating
	G09	Provides fully-coordinated 22 kAIC rating marked on the
	G09	enclosure nameplate (short-circuit coordination to UL508C
		enclosure nameplate (short-circuit coordination to UL508C
		Power Conversion Equipment and NEMA ICS 7.1).

		Analog Card
		Provides an analog output with a range of 0-20 mA for
	H09	customer use. It is factory-programmed for motor frequency,
	H09	and includes an analog card with AO and COM wired to the
		and includes an analog card with AO and COM wired to the
		customer terminal block. Reassignable X-Y range with
		keypad display.

		0-10 Vdc Auto Speed Reference
	J09	Provides controller interface for 0-10 Vdc customer supplied
	J09	auto speed reference signal into AI2 input using 0-10 V/
		auto speed reference signal into AI2 input using 0-10 V/
		4-20 mA converter with Z = 100 kΩ.

190

© 2000–2003 Schneider Electric All Rights Reserved

09/2003

Image 190

Schneider Electric 58 TRX manual Miscellaneous Options Mod Description Line Reactor, Line Contactor, Omit Keypad Display

Contents

Altivar 58 TRX Drives Product Support and Contacts Contents Altivar 58 TRX AC Drives Product Overview Product Overview User Interface Options and Accessories User Interface Options and Accessories Conduit Entrance Kits Ventilation KitsDynamic Braking Resistor Kits Type H Drive Controllers FeaturesATV58 TRX Type H Drive Controllers Ratings ATV58HU54M2ZU ATV58HU72N4XZU ATV58HU18N4ZU ATV58HU29N4ZU ATV58HU41N4ZUATV58HU54N4XZU ATV58HU90N4XZU Output Current Power at Rated Load Catalog Number ATV58 TRX Type E Drive Controllers Type E Drive ControllersATV58 TRX Type E Product Family ATV58 TRX Type F Drive Controllers Type F Drive ControllersATV58 TRX Type F Product Family ATV58 TRX Type N Drive Controllers Type N Drive ControllersRated Output Transient Output Current Size Catalog Number Type FVC Drive Controllers ATV58 Type FVC Drive Controllers Applications ATV58FHU72N4KU ATV58FHU18N4KU ATV58FHU29N4KU ATV58FHU41N4KUATV58FHU54N4KU ATV58FHU90N4KU Frame Size Frame Sizes 2 Frame Sizes 4 Terminal Locations for Type H and Type FVC DrivesTerminal Locations for ATV58 TRX Type H and Type FVC Drives Frame Size Terminal Locations for ATV58 TRX Type H Drives Description of Power Terminals Description of Power TerminalsConduit Connections for Type E and Type F Drive Controllers Description of Control Terminals Terminal Function CharacteristicsDescription of Control Terminals ATV58 TRX Control Terminals Description of ATV58 Type FVC Control Terminals Terminals Function Electrical CharacteristicsDescription of Type FVC Control Terminals Function of Terminals Keypad Display Keypad Display Accessing Menus Configuration File StorageAccess Control Menu Structure Powersuite Option Magelis Terminal Extension Cards Summary of User Interface Options and I/O Extension CardsSummary of User Interface Options Overview of I/O Extension Cards Extension Cards Functions and Characteristics of TerminalsSpecifications Terminals for the I/O Extension Card with Analog Inputs Logic inputs Impedance = 3.5 kΩ Pump Switching Option Card VW3A58210U ATV58 AI3A, AI3B Terminals for Pump Switching Option CardFunction Characteristics COM DI Vac Logic Input Module Typical Wiring VAC Logic Input Module VW3A58275U Communication Options Communication OptionsCommunication Options Conduit Entry Kits Ventilation Kits and Conduit Entry KitsVentilation Kits Conduit Entry Kits Dynamic Braking Resistor Kits Characteristics of Braking Module and ResistorsDynamic Braking Resistor Kits Braking Torque with Resistor Calculating Resistor Size Following example illustrates the process Given Altivar 58 TRX AC Drives Current/Time Characteristics for DB Resistor Assemblies DB Kits Technical Specifications Internal RFI Filters EMC Kits and RFI FiltersElectromagnetic Compatibility EMC Kits External RFI Filters Line Reactors CharacteristicsLine Reactors and Output Filters Motor Protecting Output Filters Material Handling General Use Variable Torque Basic I/O Macro-Configuration ProgrammingMACRO-CONFIGURATION Programming Analog or Digital I/O Extension Cards Parameter Display ParametersDisplay Parameters Parameter Units Description Adjustment Parameters Adjustment Parameters Low Speed Run Time Limit Skip Frequency DiagramSkip Frequency IR Compensation Drive and Motor Configuration Parameters Drive and Motor Configuration Parameters Auto Tune Motor Power FactorAlternate Ramp Switching using Frequency Threshold Automatic Adaptation of the Deceleration Ramp Acceleration and Deceleration Ramp Profile Switching FrequencyConfigurable Switching Frequencies Torque Limit Motor Noise Reduction Volts/Hertz AdjustmentCurrent Limit Adaptation Curves Energy Economizer Thermal Protection with PTC Probes Thermal Protection of ATV58 TRX Controller Drive Control Parameters Drive Control Parameters Configurable I/O Functions Configurable I/O Functions + a + B Function Compatibility Function Compatibility Assignment of Logic Inputs LIx Preset Speeds +/- Speed Wiring ExamplePreset Speeds Timing Diagram Preset Speed Logic Controlled Stop Functions Controlled Stop DiagramSwitching Between Two Motors Freewheel Stop Below Selectable Frequency External Fault Reference Switching Timing and Wiring DiagramsFault Reset Reference Switching Auto Manual Assignment of Analog Inputs AIX Speed Reference Summing DiagramAssignment of Analog Inputs AIx Speed Reference Summing Input Range Description PSP FBS Encoder Speed Feedback Motor RPM @ drive controller maximum frequency Incremental Speed Reference Thermo Temperature Probe PTCTachometer Speed Feedback Output Contactor Control Assignment of Logic Outputs R2 or LOxDrive Running High Speed Attained Current Level Attained Loss of Follower 4-20 mA SignalBrake Logic Command Motor Thermal Level Attained Assignment of Analog Outputs AOx Motor Power PI ErrorPI Integral Error Motor Thermal State Fault Management Parameters Fault Management Parameters Input Phase Loss Fault Reset TypeOutput Phase Loss Loss of Follower Controlled Stop on Power Loss Automatic Catch of a Spinning Load Catch-on-the-fly Altivar 58 TRX AC Drives Ability to Shape Acceleration and Deceleration Ramps Type FVC Adjustment ParametersATV58 Type FVC Adjustment Parameters + Speed/ Speed Around a Reference Speed Loop Modes Control ModeMotor Fluxing Options PID Regulator ATV58 Type FVC Analog Inputs Preset Setpoints for PID RegulatorType FVC Analog Inputs Analog Torque Limit ATV58 Type FVC Analog Outputs Type FVC Analog and Logic OutputsATV58 Type FVC Logic Outputs Parameter Summary Adjustment ParametersCommand Menu Parameters Parameter Summary Assignment Fault Menu ParametersAnalog Logic Customer Setting Outputs Inputs LI1 AI1 LI2 AI2 LI3 AO1 LI4 LI5 AI3 LI6 Menu Overview Parameter Code Factory SettingMenu Overview Parameter Code Menu Overview Communication Parameters General Configuration RegistersWord Code Units Description Possible Values or Range Drive Configuration Registers Configuration Registers Code Description Possible Values or Range W104 Adjustment Registers Fault Configuration RegistersWord Code Description Possible Values or Range IDC JOGJGT TDC TA4 TA2TA3 SPG LFR Control RegistersCMD CMI Monitoring Registers ETI2 ETIETI3 DP2 DP1EP1 EP2 Iolr DP8EP8 AI1R Special Drivecom Registers Spat SpalSpah Spdl Power Section Construction Information Power Section Construction Information Filter Diode Capacitor Dynamic Igbt Performance Information Constant Torque Rated Products Performance Information Constant Torque Rated Products Maximum Transient Torque Speed Regulation Constant Torque Rated ProductsSpeed Regulation Constant Torque Rated Products Operation in overspeed Minimum Clearances Installation RecommendationsInstallation Recommendations Removing the Protective Cover Mounting in a Type 12 or IP54 Metal Enclosure Mounting in a General-Purpose Metal EnclosureATV58 TRX Model Fan Flow Rate Calculating Enclosure Size Rth = Ti To Recommendations for Wire Sizing Wiring RecommendationsWiring Recommendations 100 101 Catalog Number 208 230 Motor Power Rated102 5000 AIC 103 400 460 104 With Additional 3% Motor Power at 4 kHz Rated Input Line Current105 13.4 11.4 Output Wiring Precautions 106 107 Wiring Diagram for Output ContactorUsing a Line Contactor or an Output Contactor ATV58H LC1 Three Phase Wiring Diagrams for ATV58 TRX Type H and Type N ControllersSingle Phase 108 Wiring Diagram for ATV58 TRX Type E Controllers Single Phase 109 Wiring Diagram for ATV58 TRX Type E Controllers Three Phase 110 Wiring Diagram for ATV58 TRX Type F Controllers Single Phase 111 Wiring Diagram for ATV58 TRX Type F Controllers Three Phase 112 Recommended Branch Circuit Protection Devices Recommended Fuses 208/230 V Single-Phase Drive ControllersRecommended Fuses 208/230 V Three-Phase Drive Controllers Fuses 114 Recommended Fuses 400/460 V Three-Phase Drive ControllersF1-F2-F3 Motor Drive Controller Environmental Specifications Type H SpecificationsATV58 TRX Type H Specifications 115 Electrical Specifications 116 117 ATV58 Type FVC Specifications Type FVC Specifications118 119 Dimensions for Type H and Type FVC Frame Sizes 6 DimensionsDimensions 120 121 Product Catalog No WeightIn. mm ATV58 TRX Type N Models Dimensions for Type N Models122 Conduit Entry Kit VW3A58842 to VW3A58845 123 Conduit Entry Kit VW3A58846 and VW3A58847 124 RFI Input Filters EMC VW3A58401 to VW3A58407 Single-Phase Line Reactors VW3A58501 and VW3A58502Ventilation Fan Kits VW3A58821 to VW3A58826 Plate for EMC Mounting ATV58 TRX Type H Models without EMI Filter WeightsWeights ATV58 Type FVC Models with EMI Filter Catalog Number Identification SelectionSelection Available Type H Models 128 ATV58HU18N4ZU Available Type F Models Available Type FVC ModelsAvailable Type E Models 129 Available Type N Models Options Field Installed130 DB Resistor Kits 131Conduit Entrance Kits 132 Line Reactors-480 V Rated Three PhaseExternal RFI Input Filters Line Reactors Line Reactors-208/230 V Rated Single Phase Line Reactors-208/230 V Rated Three Phase133 134 Spare Parts List for ATV58 TRX ControllersDescription For Use on Drives Catalog Number Spare Parts for ATV58HC10N4 to ATV58HC33N4 Description Model Numbers Contents Catalog No135 136 Part 1 General Suggested SpecificationsSuggested Specifications for ATV58 Type H Controllers Part 2 Products Protection Application DataEnvironmental Ratings 138 Adjustments and Configurations 139 Control Operator Interface140 Harmonic Analysis Braking Application-dependent Option141 Inspection InstallationPart 3 Execution 142 Class 8839 58M Enclosed AC Drives 143 Introduction General InformationEnclosure Types Barriered Floor Mount145 Drive Selection Standard FeaturesBypass Standard Features Class Type Number Modifications 147 Without Bypass Power Circuit DescriptionsPower Circuits With Bypass Line Reactor Options Barriered Bypass149 Line Contactor Options Harmonic Filter Options150 Operator Control Device Options Standard Modifications151 Pilot Light Options Communication and Option Cards Miscellaneous Options Mod Permanent Wire Markers Sleeve Type Mod Z10 VDC Power SupplyMod Additional Control Power VA Transformer Capacity Mod U10 Motor Space Heater Sequencing Circuit Factory Engineered Modifications Control Options Mod E227 Blown fuse indicators on control fuses Mod E218 Signal loss follower alarm relayMod E221 Seal water solenoid with pressure switch feedback Mod E228 Motor over temperature logic input Mod E232 CM-3250 PowerLogic circuit monitor Mod E229 Expand RTD inputs motor protection alarmMod E231 PowerLogic power meter display Mod E233 CM-3350 PowerLogic circuit monitor Power Options Enclosure & Miscellaneous Modifications Mod E409 Line contactor without bypass Mod E408 Semi F47 Power ComplianceMod E407 Motor a or B contactor alternation scheme Mod E410 Soft Starter Bypass Line Reactors Three Phase Line Reactors160 Motor Protecting Output Filters Motor Protecting Output Filters161 Three Phase 60 Hz Class B Ieee Three Phase Drive Isolation TransformersVoltage Codes Weight Enclosure Dimensions Size 460 208/230 Dimensions and Weights for MountingKnockout Dimensions 208/230 V CT/VT 460 208/230 Weight Enclosure Dimensions164 460 208/230 Size 165 166 208/230 Enclosure Size Hp VT Controllers @ 460 167 168 460 Size Enclosure Size Dimensions169 Application Information Speed Range & Regulation Input Currents Ratings With and without Line ReactorDrive Isolation Transformer 171 PI Regulator Follower SignalsAccelerating Torque Dynamic Braking Relay Contact Ratings Specifications for Drive ControllersEnclosure Types 173 174 References SpecificationsScope of Work Submittals Part 2 Product Environmental Ratings Motor DataApplication Data Ratings Protection Adjustments and Configurations178 AC Drive Sequencing Requirements Operator Controls179 Communication and Networking Requirements System Control and Interface Requirements180 Emergency Full Speed Requirements Message Display Center Requirements181 Harmonic Mitigation Equipment Requirements 182 Inspection InstallationPart 3 Execution Training 184 Class 8839 Econoflex AC Drives 185 Type Number Modifications Drive SelectionClass 186 Power Circuit Descriptions Standard FeaturesStandard Features Test-Normal Selector Switch Description Factory Modifications Hand-Off-Auto selector switch, Start-Stop pushbuttonsFactory Modifications Speed Potentiometer None Red power On, Green AFC Run, Yellow AFC FaultControl Options Start-Stop pushbuttons, Speed Potentiometer Light Options Mod To 15 PSI Transducer with Digital Display Miscellaneous Options Mod Description Line ReactorLine Contactor Omit Keypad Display Component Locations Component Locations191 192 193 Class 8839 ATV58 Econoflex Drive Controller Ratings 460 Vac RatingsController Ratings Class 8839 ATV58 Econoflex Drive Controller Ratings 230 Vac 195 Input Current RatingsClass 8839 ATV58 Econoflex Drive Controller Ratings 208 Vac Factory-mounted Line Reactor 196 Specifications for 460 Vac Drive Controllers Technical CharacteristicsTechnical Characteristics 197 Dissipated Watts Loss Dissipated Watts Loss198 Weight Enclosure Dimensions 460 208/230 Vac Dimensions and WeightsDimensions and Weights for Type 1 and Type 12K Enclosures 199 200 460 208/230 Vac Vac Econoflex Models Recommended Spare PartsRecommended Spare Parts 208/230 Vac Econoflex Models Circuit Breaker List Controller Horsepower Circuit BreakerCircuit Breaker List 202 Application Information 203 Input Current Ratings 204 Speed Range and Regulation 205 References Sample Specifications206 Manufacturers SubmittalsPart 2 Product Construction 208 Operator Controls Keypad Display Interface209 Documentation Drive Isolation & Bypass ContactorsHarmonic Mitigation 210 Class 8998 Motor Control Centers 211 General Information General Information and MCC Package FeaturesMCC Package Features 212 Monitoring and Indication Factory Options, Monitoring and IndicationFactory Options NEMA/EEMAC Basic Drive Power Circuit AC Drive Options and Basic Drive Power CircuitBasic Drive Power Circuit AC Drive Options Variable Torque 480 Vac Altivar 58 TRX AC Drives Space RequirementsSpace Requirements Variable Torque 208/240 Vac Altivar 58 TRX AC Drives Variable Torque, Low Noise 480 Vac Altivar 58 TRX AC Drives Constant Torque 208/240 Vac Altivar 58 TRX AC Drives216 Power Contactor Options Power Contactor Options217 Option Pilot Devices and Misc. OptionsPilot Devices 218 Auto Start Relay without Delay 219 MULTI-DRIVE Process Line Cabinets Multi-Drive Process Line Cabinets220 Wiring Diagrams Wiring Diagrams221 222 Regulatory Requirements 223 224 Thermal Management 225 Electrical Ratings 226 227 Optional General Purpose Input/Output Extension Control228 Harmonic Analysis Optional Isolation/Bypass Contactors229 230 Page Altivar 58 TRX AC Drives Schneider Electric