Schneider Electric ATV58 TRX Type E Drive Controllers, ATV58 TRX Type E Product Family

Altivar® 58 TRX AC Drives

Type E Drive Controllers

ATV58NEMAb_w no back.tif

ATV58 TRX Type E Product Family

12

© 2000–2003 Schneider Electric All Rights Reserved

ATV58 TRX TYPE E DRIVE CONTROLLERS

The ATV58 TRX family of adjustable-frequency AC drive controllers is used to control three-phase asynchronous motors. The ATV58 TRX Type E model contains an ATV58 TRX Type H drive controller packaged in a compact, Type 1 enclosure. It is for use in mechanical rooms, OEM equipment, and factory floor applications. The following Type E drive controller models are available:

•1 to 7½ hp (0.75 to 5.5 kW), 400/460 Vac, three-phase input

•½ to 3 hp (0.37 to 2.2 kW), 200/240 Vac, single-phase input

•2 to 3 hp (1.5 to 2.2 kW), 200/240 Vac, three-phase input

Each ATV58 TRX Type E drive controller contains:

•A GV2 manual motor starter, ATV58 TRX drive controller, and an output contactor

•A three-position selector switch wired for “RUN FORWARD”

•A manual speed potentiometer mounted on the front of the enclosure

•Space for two additional 16-mm operators

•Four conduit openings that are closed with plugs

•A transparent plastic door for viewing the status LEDs and a separately- supplied keypad

All ATV58 TRX communication and I/O options can be used in the Type E controllers. The Type E drive controllers can be used on constant or variable torque applications. The ratings are shown in the tables below.

200 Vac -10% / 240 Vac +10% at 50/60 Hz ±5%, Single-Phase Input with 3-Phase Output

Frame	Drive Controller	Motor Power▼			Rated	Transient
					Output Current	◆
Size▲	Catalog Number					Output Current
		kW		HP	A	A
1	ATV58EU09M2ZU		0.37	0.5	2.3	3.1
1	ATV58EU18M2ZU		0.75	1	4.1	5.6
2	ATV58EU29M2ZU		1.5	2	7.8	10.6
3	ATV58EU41M2ZU■		2.2	3	11	15
200 Vac -10% / 240 Vac +10% at 50/60 Hz ±5%, 3-Phase Input with 3-Phase Output
Frame	Drive Controller	Motor Power▼			Rated	Transient
					Output Current	◆
Size▲	Catalog Number					Output Current
		kW		HP	A	A
2	ATV58EU29M2ZU		1.5	2	7.8	10.6
3	ATV58EU41M2ZU		2.2	3	11	15
400 Vac -10% / 460 Vac +10% at 50/60 Hz ±5%, 3-Phase Input with 3-Phase Output
Frame	Drive Controller	Motor Power▼			Rated	Transient
					Output Current	Output Current◆
Size▲	Catalog Number
		kW		HP	A	A
2	ATV58EU18N4ZU		0.75	1	2.3	3.1
2	ATV58EU29N4ZU		1.5	2	4.1	5.6
2	ATV58EU41N4ZU		2.2	3	5.8	7.9
3	ATV58EU54N4ZU		3	–	7.8	10.6
3	ATV58EU72N4ZU		4	5	10.5	14.3
3	ATV58EU90N4ZU		5.5	7.5	13	17.7

▲For dimensions, see page 122; for wiring diagrams, see pages 109 and 110.

▼Power indicated is for a switching frequency between 0.5 and 4 kHz, and at steady state. For switching frequency between 8 and 16 kHz, use the next largest size drive controller. (For example, for 2 hp, order drive controller ATV58EU41M2ZU.) If the duty cycle (that is, the drive controller run time) does not exceed 60% (36 second maximum for a 60 second cycle), this is not necessary.

◆For 60 seconds.

■A line reactor (3% minimum) must be used with this drive controller.

09/2003