Schneider Electric 58 TRX manual Ratings

Altivar® 58 TRX AC Drives

Type H Drive Controllers

Ratings

ATV58 TRX Type H drive controllers may be rated for constant torque (CT), variable torque (VT), and variable torque low noise (VTLN) applications.

•CT applications usually require 100% of motor-rated torque through the entire speed range, high transient torque capability, and speed regulation.

•VT applications, such as centrifugal fans and centrifugal pumps, do not require high transient torque capability. This typically allows a drive to be rated for additional horsepower and additional current as compared to the constant torque rating.

•VTLN applications, such as centrifugal fans and centrifugal pumps, do not require high transient torque capability. However, this rating uses a higher switching frequency for quieter motor operation. As a result, the drive may be rated at the same horsepower and current as the constant torque rating, particularly at large horsepower sizes.

▼Refer to page 127 for a complete list of catalog numbers. An “X” in the catalog number indicates that the product does not have an internal EMC filter. If an internal EMC filter is required, delete the “X” from the catalog number.

■When these drive controllers are used with a single-phase input, a line reactor (3% minimum) must be used.

The 125–500 hp drive controllers are listed in this catalog with ratings typically used for VT applications. With proper selection, this range of controllers can also be used in CT applications, such as compressors, conveyors, and extruders, where high performance is not required at low speeds. The 125–500 hp product ratings in this catalog are for applications that require 100% rated torque down to 6 Hz. If the application requires more than 110% transient torque for one minute, select the appropriate horsepower product. For assistance with selecting the proper AC drive controller for constant torque applications, consult your local Square D drives specialist.

Application information is also available in product data bulletin SC100, Adjustable Frequency Controllers Application Guide, available at www.SquareD.com, or the NEMA Standards Publication: Application Guide For AC Adjustable Speed Drive Systems.

Ratings for ATV58 TRX Type H Constant Torque; 208/230 Vac, Single-Phase Input with 3-Phase Output; Switching Frequency at 4 kHz

	Drive Controller	Motor Power		Rated	Transient	Total Dissipated
Frame Size		208/230 Vac		Output Current	Output Current	Power at Rated Load
	Catalog Number▼
		kW	HP	A	A	W
1	ATV58HU09M2ZU	0.37	0.5	2.3	3.1	42
1	ATV58HU18M2ZU	0.75	1	4.1	5.6	64
2	ATV58HU29M2ZU	1.5	2	7.8	10.6	107
2	ATV58HU41M2ZU	2.2	3	11	15.0	156
3	ATV58HU72M2ZU■	3	4	13.7	18.6	160
4	ATV58HU90M2ZU■	4	5	18.2	24.8	176
4	ATV58HD12M2ZU■	5.5	7.5	24.2	32.9	204

▼Refer to page 127 for a complete list of catalog numbers. An “X” in the catalog number indicates that the product does not have an internal EMC filter. If an internal EMC filter is required, delete the “X” from the catalog number.

■When these drive controllers are used with a single-phase input, a line reactor (3% minimum) must be used.

Ratings for ATV58 TRX Type H Variable Torque, Low Noise; 208/230 Vac, Single-Phase Input with 3-Phase Output; Switching Frequency: ATV58HU09M2–D12M2 at 8 kHz; ATV58HD16M2–D46M2 at 4 KHz

	Drive Controller	Motor Power		Rated	Transient	Total Dissipated
Frame Size		208/230 Vac		Output Current	Output Current	Power at Rated Load
	Catalog Number▼
		kW	HP	A	A	W
1	ATV58HU09M2ZU	0.37	0.5	2.5	2.8	42
1	ATV58HU18M2ZU	0.75	1	4.8	5.3	64
2	ATV58HU29M2ZU	1.5	2	7.8	8.6	107
2	ATV58HU41M2ZU	2.2	3	11	12.1	156
3	ATV58HU72M2ZU■	3	4	14.3	15.7	160
4	ATV58HU90M2ZU■	4	5	17.5	19.3	176
4	ATV58HD12M2ZU■	5.5	7.5	25.3	27.8	204
6	ATV58HD16M2XZU■	7.5	10	30.8	33.9	323
6	ATV58HD23M2XZU■	11	15	46.2	50.8	550
7	ATV58HD28M2XZU■	15	20	60	66.0	745
7	ATV58HD33M2XZU■	18.5	25	75	82.5	895
7	ATV58HD46M2XZU■	22	30	88	96.8	900

8

© 2000–2003 Schneider Electric All Rights Reserved 09/2003