Schneider Electric 58 TRX manual Sample Specifications, References, 206

Class 8839 Econoflex™ AC Drives

Sample Specifications

SPECIFICATIONS FOR CENTRIFUGAL PUMP AND FAN APPLICATIONS

CLASS 8839 ECONOFLEX™ AC DRIVES

NOTE: These specifications apply to Enclosed Adjustable Frequency Drive Controllers, herein referred to as AC Drives. The Power Converter is a component of the AC Drive. To ensure project compatibility, these specifications follow the Construction Specifications Institute (CSI) format. Copies of this specification are available from Square D Company on the web site squared.com. Application information directly affects the type and rating of AC Drive that will be quoted. Brackets [ ] are provided where such data should be included. Please call your local Square D distributor or sales representative for specification assistance regarding a particular application. The AC Drive specification should be included in Division 16, Electrical, for proper coordination with the electrical distribution system.

PART 1: GENERAL

1.01 Scope of Work

A.This section provides specification requirements for adjustable frequency drives and variable speed drives, herein referred to as AC Drives, for use with [NEMA B] [NEMA E] design AC motors.

B.The AC Drive manufacturer shall furnish, field test, adjust, and certify all installed AC Drives for satisfactory operation.

C.Any exceptions/deviations to this specification shall be indicated in writing and submitted with the quotation.

1.02 References

A.ANSI/NFPA 70 - National Electrical Code.

B.ANSI C84.1 - Voltages Tolerances for North America.

C.IEC 60068 Part 2-3 - Basic Environmental Testing Procedures Part 2: Tests - Test Ca: Damp Heat.

D.IEC 60146.1 - Semiconductor Converters - General Requirements and Line Commutated Converters Part 1-1: Specifications of Basic Requirements.

E.IEC 60664-1 - Insulation Coordination for Equipment Within Low-Voltage Systems.

F.IEC 60447 - Man-Machine Interface Actuating Principles.

G.IEC 60439-1 - Low Voltage Switchgear and Control gear Assemblies.

H.IEC 60947-1 - Low Voltage Switchgear and Control gear Components.

I.IEC 60364-1 - Electrical Installation of Buildings.

J.IEC 60204-1/NFPA 79 - Electrical Equipment of Industrial Machines/Industrial Machinery.

K.IEC 60106 - Guide for Specifying Environmental Conditions for Equipment Performance Rating.

L.IEC 60529 - Degrees of Protection Provided by Enclosure.

M.IEC 61000 - Electromagnetic Compatibility.

N.IEC 60721 - Classification of Environmental Conditions.

O.IEC 60255-8 Overload Relays.

P.IEC 60801-2,-3,-4,-5 - Immunity Tests.

Q.NEMA ICS 6 - Industrial Control and Systems Enclosures.

R.NEMA ICS, Part 4 - Overload Relays.

S.NEMA Publication 250 - Enclosures for Electrical Equipment.

T.NEMA ICS 2-321 - Electrical Interlocks.

U.NEMA ICS7 - Industrial Control and Systems Adjustable Speed Drives.

V.NEMA ICS 7.1 - Safety Standards for Construction and Guide for Selection Installation and Operation of Adjustable Speed Drives.

W.UL 50 - UL Standard for Safety Enclosures for Electrical Equipment.

X.UL 98 - UL Standard for Disconnect Switches.

Y.UL 507 - UL Standard for Safety Electric Fans.

Z.UL 508 - UL Standard for Safety Industrial Control Equipment.

206

© 2000–2003 Schneider Electric All Rights Reserved

09/2003