Class 8839 58M Enclosed AC Drives
Dimensions and Weights for Mounting
167
09/2003 © 2000–2003 Schneider Electric All Rights Reserved
125–500 hp VT Controllers @ 460 V
7.50
(190.5)
11.00
(279.4)
G
3.95
(100.3)
2.50
(63.5)
12.10
(307.3)
3.95
(100.3)
2.4
(60.9)
2.50
(63.5)
C
A
D
16.80
(426.7)
1.6
(40.6)
1.6
(40.6)
1.4
(35.5)
E
F
91.50
(2324.1)
3.00
(76.2)
11.69
(296.9)
71.94
(1827.2)
7.74
(196.5)
20.00
(508) Ø1.50
(38.1)
B
A
1.98
(50.2)
Lifting
Holes
hp Weight Enclosure Dimensions Enclosure
Size
460 V A B C D E F G
VT lb kg in. mm in . mm in. mm in. mm in. mm in. mm in. mm
125 500 2 26.7 25 635 21.16 537.4 5.84 148.3 3.3 83.8 4.3 109.2 22.0 558.8 12.5 317.5 H
150–250 650 294.8 30 762 26.16 664.4 10.63 270.0 3.3 83.8 4.3 109.2 27.2 690.8 15.0 381.0 I
300–500 975 442.2 35 889 31.16 791.4 15.03 381.7 4.1 104.1 5.1 129.5 32.2 817.8 17. 5 444.5 J
Dimensions: in. (mm)
Conduit Entry - Bottom View
Conduit Entry - Top View
Front
Rear
Front
Rear
NOTE:Ci rcled numbers indicate depth in
inches from the conduit entry plate to the
nearest obstruction for wiring.
NOTE:Provide at least 36 in. of mounting
clearance in front of the drive controller and
at least 24 in. of mounting clearance at the
top of the drive controller. Floor mounted
units may be mounted side by side without
clearance.
NOTE:Remove the top or bottom conduit
plates as necessary to facilitate conduit
entry. Ensure that the plates are replaced
before working on the drive controller.
n-b conduit high hp.eps
58M new outline.eps