Polycom 2000/4000 manual MGC to RMX 2000 Cascading

Polycom RMX 2000/4000 Administrator’s Guide

MGC to RMX 2000 Cascading

Level 1 (Master) Level 2 (Slave to Level 1)

MGC is always on level 1 and must be set as the Master MCU. If the cascading topology includes additional MGCs as well as RMXs it is recommended to define Video Switching conferences for all the cascading conferences in the topology.

Depending on the dialing direction, the following procedures must be performed:

Table 2-18Set up Procedures according to the Dialing Direction

Dialing	MGC Level 1	RMX 2000 Level 2
Direction
MGC to	Set the appropriate flags	Set the appropriate flags (done
RMX 2000	(done once only).	once only).
		Define the cascade-enabled
		Entry Queue, setting it as Slave.
	Define the conference	Define the conference setting
	setting and its line rate to be	and its line rate to be the same
	the same as the one set on	as the one set on the MGC.
	the RMX 2000.
	Define the dial-out
	participant (Cascaded Link)
	to the conference running
	on the RMX 2000.

2-73