Polycom RMX 2000/4000 Administrator’s Guide

Connecting to the Management Network

To connect directly to the RMX:

1Using a LAN cable, connect the workstation to the LAN 2 Port on the RMX’s back panel.

LAN 2 Port

2Connect the power cable and power the RMX On.

3Start the RMX Web Client application on the workstation, by entering the factory setting Management IP address in the browser’s address line and pressing Enter.

4In the RMX Web Client Login screen, enter the default Username (POLYCOM) and Password (POLYCOM) and click the Login button. The Fast Configuration Wizard starts.

If no USB key is detected and either: this is the First Time Power-upor the Default IP Service has been deleted and the RMX has been reset, the following dialog box is displayed:

G-7

Page 748
Image 748
Polycom 2000/4000 manual Connecting to the Management Network, To connect directly to the RMX