Polycom 2000/4000 manual GatekeeperPrefix CascadeEnable

Polycom RMX 2000/4000 Administrator’s Guide

Table 2-17New Participant – Dial-out Cascade Link (Continued)

Field	Description
Alias Name	If you are using the target MCU IP address, enter the
	dial string made up of the ID of the cascade enabled
	Entry Queue and the Conference ID as follows:
	<Cascade_Enabled_Entry_Queue_ID> ##
	<Conference_ID>
	For example: 78485##24006
	If a gatekeeper is used, you can enter the prefix of
	the target MCU, registered with the gatekeeper,
	instead of the IP address, as part of the dialing string.
	<Gatekeeper_Prefix><Cascade_Enable_
	Entry_ Queue_ID>##<Conference_ID>
	For example: 92578485##24006
	If the conference has a password and you want to
	include the password in the dial string, append the
	password to in the dial string after the Conference
	ID.
	For example: 78485##24006##1234
	If the conference has a password and you do not
	want to include the password in the dial string, set
	the
	ENABLE_CASCADED_LINK_TO_JOIN_WITHOUT_
	PASSWORD
	flag to YES.
	For more information see the RMX2000/4000
	Administrator’s Guide, “Modifying System Flags” on
	page 11-5.
Alias Type	Select E.164 (digits 0-9, *, #).

2-71