Chapter 2-Additional Conferencing Information

3Define the standard Entry Queue parameters (as described in Chapter 3).

4In the Cascade field, select Master or Slave depending on the Master/ Slave relationship.

Set this field to Master if the Entry Queue is defined on the MCU that is at the center of the topology and other conferences dial into it (acting as the Master).

Set this field to Slave if the Entry Queue is defined on the MCU acting as a Slave, that is, to which the link from the Master MCU (MCU at the center of the topology) is dialing.

If you are defining an HD cascaded Entry Queue, it is recommended to select the same Profile that is selected for both conferences.

5Click OK.

The new Entry Queue enabling cascading is created.

2-54

Page 96
Image 96
Polycom 2000/4000 manual Additional Conferencing Information