Chapter 17-RMX Administration and Utilities

Traps

Three types of traps are sent as follows:

1ColdStart trap. This is a standard trap which is sent when the MCU is reset.

coldStart notification received from: 172.22.189.154 at 5/20/ 2007 7:03:12 PM

Time stamp: 0 days 00h:00m:00s.00th

Agent address: 172.22.189.154 Port: 32774 Transport: IP/UDP

Protocol: SNMPv2c Notification

Manager address: 172.22.172.34 Port: 162 Transport: IP/UDP

Community: public

Enterprise: enterprises.8072.3.2.10 Bindings (3)

Binding #1: sysUpTime.0 *** (timeticks) 0 days 00h:00m:00s.00th

Binding #2: snmpTrapOID.0 *** (oid) coldStart

Binding #3: snmpTrapEnterprise.0 *** (oid) enterprises.8072.3.2.10

Figure 1 An Example of a ColdStart Trap

2Authentication failure trap. This is a standard trap which is sent when an unauthorized community tries to enter.

authentication Failure notification received from: 172.22.189.154 at 5/20/2007 7:33:38 PM

Time stamp: 0 days 00h:30m:27s.64th

Agent address: 172.22.189.154 Port: 32777 Transport: IP/UDP

Protocol: SNMPv2c Notification

Manager address: 172.22.172.34 Port: 162 Transport: IP/UDP

Community: public

Enterprise: enterprises.8072.3.2.10 Bindings (3)

Binding #1: sysUpTime.0 *** (timeticks) 0 days 00h:30m:27s.64th

Binding #2: snmpTrapOID.0 *** (oid) authenticationFailure

Binding #3: snmpTrapEnterprise.0 *** (oid) enterprises.8072.3.2.10

Figure 2 An Example of an Authentication Failure Trap

17-68

Page 550
Image 550
Polycom 2000/4000 manual Traps, 17-68