Polycom 2000/4000 manual 17-22

Chapter 17-RMX Administration and Utilities

Table 17-3Manually Added System Flags – MCMS_PARAMETERS (Continued)

Flag and Value	Description
FORCE_CIF_PORT_	Sets the MCU to allocate one CIF video
ALLOCATION	resource to an endpoint, regardless of the
	resolution determined by the Conference
	Profile parameters. You can specify the
	endpoint types for which resource allocation
	can be forced to CIF resource, enabling other
	types of endpoints to use higher resolutions in
	the same conference.
	Enter the product type to which the CIF
	resource should be allocated. Possible values
	are:
	• CMA Desktop - for CMA desktop client
	• VSX nnnn - where nnnn represents the
	model number for example, VSX 8000.
FORCE_RESOLUTION	Use this flag to specify IP (H.323 and SIP)
	endpoint types that cannot receive wide
	screen resolution and that were not
	automatically identified as such by the RMX.
	Possible values are endpoint types, each type
	followed by a semicolon. For example, when
	disabling Wide screen resolution in an HDX
	endpoint enter the following string: HDX;
	Note: Use this flag when the flag
	SEND_WIDE_RES_TO_IP is set to YES.
FORCE_STATIC_MB_	This flag supports Tandberg MXP mode of
ENCODING	sending and receiving video by IP endpoint in
	HD 720p resolution and Video Quality set to
	Motion. This mode is not supported for ISDN
	endpoints.
	Default value: Tandberg MXP.
	To disable this flag, enter NONE.

17-22