Polycom 2000/4000 manual 17-16

Chapter 17-RMX Administration and Utilities

Table 17-2System Flags – MCMS_PARAMETERS (Continued)

Flag	Description
SESSION	If there is no input from the user or if the
_TIMOUT_IN	connection is idle for longer than the number
_MINUTES	of minutes specified by this flag, the
	connection to the RMX is terminated.
	Value: 0-99
	0 - Session Timeout is disabled, however this
	feature cannot be disabled when the RMX is
	in Enhanced Security Mode.
	Default: 0
	Default (JITC_MODE=YES): 15
TERMINATE_CONF_	If YES, sets conferences to automatically
AFTER_CHAIR_	terminate if the Chairperson disconnects from
DROPPED	the conference.
	Default: YES
USER_LOCKOUT	If YES, a user is locked out of the system
	after three consecutive Login failures with
	same User Name. The user is disabled and
	only the administrator can enable the user
	within the system.
	Default: NO
	Default in Enhanced Security Mode: YES
	For details, see "User Lockout” on
	page 11-15.
USER	Defines the duration of the Lockout of the
_LOCKOUT	user.
_DURATION	Value: 0 - 480
_IN_MINUTES	0 means permanent User Lockout until the
	administrator re-enables the user within the
	system.
	Default: 0
USER_LOCKOUT_	Defines the time period during which the
WINDOW_IN_MINUTES	three consecutive Login failures occur.
	Value: 0 - 45000
	0 means that three consecutive Login failures
	in any time period will result in User Lockout.
	Default: 60

17-16