Chapter 16-RMX Manager Application

Installing RMX Manager for Secure Communication Mode

The RMX Manager cannot be downloaded from a site, operating in Secure Communication Mode, without a valid TLS certificate.

The following procedure describes how to obtain a TLS certificate and download the RMX Manager from a site operating in Secure Communication Mode.

FIPS is always enabled in JITC Mode, and when ClickOnce is used to install

RMX Manager, the workstation must have one of the following installed:

.NET Framework 3.5 or a later version of the .NET Framework.

.NET Framework 2.0 plus Service Pack 1 or later.

To install the RMX Manager:

1Set the RMX to Non Secure Communication Mode

a In the RMX Management pane, click IP Network Services.

b In the IP Network Services list pane, double click the Management Network entry.

The Management Network Properties dialog box is displayed.

16-28

Page 474
Image 474
Polycom 2000/4000 manual Installing RMX Manager for Secure Communication Mode, To install the RMX Manager, 16-28