Chapter 16-RMX Manager Application

The Conferences list toolbar contains the following buttons:

Save Conference to Template

Delete Conference New Conference

MCU Name

Start/Resume/Pause Recording

Stop Recording

Toolbar

List Headers

Conference Data

If Conference Recording is enabled the following buttons are enabled:

Start/Resume Recording – start/resume recording.

Stop Recording – stop recording.

Pause toggles with the Start/Resume button.

Monitoring conferences

New conferences run on MCUs selected for Monitoring are automatically added to the Conferences list. You can sort the conferences by MCU by clicking the MCU column heading in the Conferences table. Conferences run on MCUs that are connected but not monitored are not listed.

Using Windows multiple selection methods to select conferences, participants from several conferences running on different MCUs can be listed in the Participants list pane.

Starting a new conference

When starting a new conference, you must first select the MCU to run the conference in the MCUs pane.

RMX Management

The RMX Management pane lists the entities of the selected MCU that need to be configured to enable the RMX to run conferences. Only users with Administrators permission can modify these parameters.

The RMX Management pane is divided into two sections:

Frequently Used – parameters often configured monitored or modified.

Rarely Used – parameters configured during initial system set-up and rarely modified afterward.

16-12

Page 458
Image 458
Polycom 2000/4000 RMX Management, Conferences list toolbar contains the following buttons, Monitoring conferences, 16-12