Polycom 2000/4000 manual SIP Only

Polycom RMX 2000/4000 Administrator’s Guide

Table 5-2New Participant – General Properties (Continued)

Field	Description
SIP Address/	Select the format in which the SIP address is written:
Type	• SIP URI - Uses the format of an E-mail address,
(SIP Only)	typically containing a user name and a host name:
	sip:[user]@[host]. For example,
	sip:dan@polycom.com.
	• TEL URI - Used when the endpoint does not
	specify the domain that should interpret a
	telephone number that has been input by the user.
	Rather, each domain through which the request
	passes would be given that opportunity. As an
	example, a user in an airport might log in and send
	requests through an outbound proxy in the airport.
	If the users enters “411” (this is the phone number
	for local directory assistance in the United States),
	this number needs to be interpreted and
	processed by the outbound proxy in the airport,
	and not by the user's home domain.
	In this case, tel: 411 is the correct choice.
	Note: This field is removed from the dialog box when
	the ISDN/PSTN protocol is selected.
Endpoint	Enter the IP address of the endpoint’s internal site to
Website IP	enable connection to it for management and
Address	configuration purposes.
(IP only)	This field is automatically completed the first time that
	the endpoint connects to the RMX. If the field is blank
	it can be manually completed by the system
	administrator. The field can be modified while the
	endpoint is connected
Audio Only	Select this check box to define the participant as a
	voice participant, with no video capabilities.

3Usually, additional definitions are not required and you can use the system defaults for the remaining parameters. In such a case, click OK.

To modify the default settings for advanced parameters, click the Advanced tab.

5-9