Polycom 2000/4000 manual Alarm Code Alarm Description

Appendix B-Alarms and Faults

Table B-1Alarms (Continued)

Alarm Code	Alarm Description
IP Network Service not found	Possible explanations:
	• IP Service not found in the Network Services list.
	• m_StatusRead IpServiceList.
ISDN/PSTN Network Services
configuration changed
License not found
Low Processing Memory	Low Processing Memory:
	Process is approaching memory utilization limit:
	[Memory Utilization Percent]
Low system Memory	Low system Memory:
	The system exceeded 80% of memory usage.
Management Network not configured
MCU is not configured for AVF
gatekeeper mode
MCU reset	The MCU was reset automatically or by the user.
	MCU reset:
	Reset cause: [reset source].
MCU Reset to enable Diagnostics mode
Missing Central Signaling configuration
MPL startup failure. Authentication not
received.
MPL startup failure. Management
Network configuration not received.
Music file error	The music file played during the connection to the
	conference cannot be accessed.
No clock source	The system could not use any of the connected ISDN
	spans as clock source

B-10