Polycom 2000/4000 manual Appendix A-Disconnection Causes

Appendix A-Disconnection Causes

Table A-1Call Disconnection Causes (Continued)

Disconnection Cause	Description
Resources deficiency	Insufficient resources available.
Call close. Call closed by	The MCU disconnected the call.
MCU
H323 call close. No port	Insufficient audio ports.
left for audio
H323 call close. No port	The required video ports exceed the number of
left for video	ports allocated to video in fixed ports.
H323 call close. No port	The required data ports exceed the number of
left for FECC	ports allocated to data in fixed ports.
H323 call close. No control	The required control ports exceed the number of
port left	ports allocated to control data in fixed ports.
H323 call close. No port	The required video content ports exceed the
left for videocont	number of ports allocated to video content in
	fixed ports.
H323 call closed. Small	The gatekeeper allocated insufficient bandwidth
bandwidth	to the connection with the endpoint.
H323 call closed. No port	There are no free ports left in the IP card.
left
Caller not registered	The calling endpoint is not registered in the
	gatekeeper.
H323 call closed. ARQ	The endpoint sent an ARQ message to the
timeout	gatekeeper, but the gatekeeper did not respond
	before timeout.
H323 call closed. DRQ	The endpoint sent a DRQ message to the
timeout	gatekeeper, but the gatekeeper did not respond
	before timeout.
H323 call closed. Alt	An alternate gatekeeper failure occurred.
Gatekeeper failure
H323 call closed.	A gatekeeper failure occurred.
Gatekeeper failure

A-2