Chapter 17-RMX Administration and Utilities
17-28
4Click OK to close the New Flag dialog box.
The new flag is added to the flags list.
5Click OK to close the System Flags dialog box.
To delete a flag:
1In the System Flags dialog box, select the flag to delete and click the
Delete Flag button.
2In the confirmation message box, click Yes to confirm.
3Click OK to close the System Flags dialog box.
SEND_WIDE_RES_TO_
ISDN When set to YES, the RMX sends wide
screen resolution to ISDN endpoints.
When set to NO (default), the RMX does not
send wide screen resolution to ISDN
endpoints.
Default: NO.
SEND_WIDE_RES_TO_
IP When set to YES (default), the RMX sends
wide screen resolution to IP endpoints.
Endpoint types that do not support wide
screen resolutions are automatically identified
by the RMX according to their product type
and version and will not receive the wide
resolution even when the flag is set to YES.
When manually added and set to NO, the
RMX does not send wide screen resolution to
all IP endpoints.
Default: YES.
Table 17-3 Manually Added System Flags – MCMS_PARAMETERS
(Continued)
Flag and Value Description
For flag changes to take effect, reset the MCU. For more information, see the
RMX Administrator’s Guide, "Resetting the RMX” on page 16-107.