Polycom 2000/4000 manual Event Specific Fields, Field Description

Appendix C-CDR Fields - Unformatted File

Event Specific Fields

The following tables describe the fields which are specific to each type of event.

Some fields that were supported by the MGC Manager, are not supported by the RMX 2000. In addition, for some fields the RMX 2000 has a fixed value, whereas the MGC Manager supported multiple values. For more information about the MGC Manager fields and values, see the MGC Manager User’s Guide Volume II, Appendix A.

Table C-3Event Fields for Event 1 - CONFERENCE START

Field	Description
Dial-Out Manually	Indicates whether the conference was a dial-out
	manually conference or not.
	Currently the only value is:
	0 - The conference was not a dial-out manually
	conference, that is, the MCU initiates the communication
	with dial-out participants, and the user does not need to
	connect them manually.
Auto Terminate	Indicates whether the conference was set to end
	automatically if no participant joins the conference for a
	predefined time period after the conference starts, or if
	all participants disconnect from the conference and the
	conference is empty for a predefined time period.
	Possible values are:
	0 - The conference was not set to end automatically.
	1 - The conference was set to end automatically.
Line Rate	The conference line rate, as follows:
	0 - 64 kbps
	6 - 384 kbps
	12	- 1920 kbps
	13	- 128 kbps
	15	- 256 kbps
	23	- 512 kbps
	24	- 768 kbps
	26	- 1152 kbps
	29	- 1472 kbps
	32	- 96 kbps

C-16