Polycom 2000/4000 manual Moving Participants, Yes

Polycom RMX 2000/4000 Administrator’s Guide

•Move between encrypted and non-encrypted conferences depends on the ALLOW_NON_ENCRYPT_PARTY_IN_ENCRYPT_CONF flag setting, as described in Table 7-6:

Table 7-6Participant Move Capabilities vs. ALLOW_NON_ ENCRYPT_PARTY_IN_ENCRYPT_CONF flag setting

Flag	Source	Destination	Move Enabled?
	Conference/	Conference
Setting
	EQ Encrypted	Encrypted
NO	Yes	Yes	Yes
NO	Yes	No	Yes
NO	No	Yes	No
NO	No	No	Yes
YES	Yes	Yes	Yes
YES	Yes	No	Yes
YES	No	Yes	Yes
YES	No	No	Yes

•When moving dial-out participants who are disconnected to another conference, the system automatically dials out to connect them to the destination conference.

•Cascaded links cannot be moved between conferences.

•Participants cannot be moved to a conference if the move will cause the number of participants to exceed the maximum number of participants allowed for the destination conference.

Moving Participants

RMX users can assist participants by performing the following operations:

•Move a participant to an Operator conference (Attend a participant).

•Move a participant to the Home (destination) conference.

•Move participant from one ongoing conference to another

A move can be performed using the following methods:

•Using the participant right-click menu

7-27