Chapter 17-RMX Administration and Utilities

If another SD endpoint (11th) attempts to connect, the system first tries to allocate resources to the SD endpoint first from HD720 and then from HD1080 resources.

If HD resources are allocated to an SD endpoint, HD endpoints may experience a resource deficiency when trying to connect and may not be connected at HD resolution.

If there are no available HD resources the system tries to allocate resources to the SD endpoint from any available CIF resources.

If there are no available CIF resources the system tries to allocate resources to the SD endpoint from any available Audio Only resources. If Audio Only resources are allocated the HD endpoint, it is connected as an Audio Only participant.

Configuring the Video/Voice Resources in MPM Mode

Resource re-configuration should only be performed when no conferences are running on the RMX.

To allocate Audio Only resources:

1In the RMX menu, click Setup > Video/Voice Port Configuration. The Video/Voice Port Configuration dialog box opens.

1

Resource Maximum from License

A single slider is displayed, calibrated according to licensed video resources indicated in CIF ports in the RMX.

17-46

Page 528
Image 528
Polycom 2000/4000 manual Configuring the Video/Voice Resources in MPM Mode, 17-46