Polycom 2000/4000 manual Accepted Host IP Address dialog box opens, 17-75

Polycom RMX 2000 Administrator’s Guide

Table 17-17RMX-SNMP Properties – Security Options (Continued)

Field	Description
Accept Host	Note: Queries sent with different strings will be
Community Name	regarded as a violation of security, and, if the Send
(cont.)	Authentication Trap check box is selected, an
	appropriate message will be sent to the SNMP
	Manager.
Accept SNMP	Select this option if a query sent from any Manager
Packets from all	terminal is valid. When selected, the Accept SNMP
Host	Packets from These Hosts option is disabled.
Accept SNMP	Lists specific Manager terminals whose queries will
Packets from the	be considered as valid. This option is enabled when
following Hosts	the Accept SNMP Packets from any Host option is
	cleared.

15To specifically define one or more valid terminals, ensure that the Accept SNMP Packets from any Host option is cleared and then click the Add button.

The Accepted Host IP Address dialog box opens.

16Enter the IP Address of the Manager terminal from which valid queries may be sent to the MCU, and then click OK.

Click the Add button to define additional IP Addresses.

The IP Address or Addresses are displayed in the Accept SNMP Packets from These Hosts box.

Queries sent from terminals not listed in the Accept SNMP Packets from These Hosts box are regarded as a violation of the MCU security, and if the Send Authentication Trap check box is selected, an appropriate message will be sent to all the terminals listed in the SNMP Properties – Traps dialog box.

17In the RMX - SNMP Properties - Security dialog box, click OK.

17-75