Polycom 2000/4000 manual 17-19

Polycom RMX 2000 Administrator’s Guide

Table 17-3Manually Added System Flags – MCMS_PARAMETERS (Continued)

Flag and Value	Description
BONDING_DIALING	When set to:
_METHOD	•	SEQUENTIAL
(ISDN)		The MCU initiates channel connections
		sequentially until it reaches the number of
		channels defined by the
		BONDING_NUM_CHANNELS_IN
		_GROUP flag.
		When a channel is connected, dialing
		begins for the next channel in the group.
	•	BY_TIMERS
		The MCU initiates channel connections
		sequentially using the values of the
		BONDING_CHANNEL _DELAY and
		BONDING_GROUP_DELAY flags.
		The first group of channels is dialed, using
		the BONDING_CHANNEL_DELAY
		between dialing attempts for each channel
		in the group.
		The RMX then implements the
		BONDING_GROUP_DELAY, before
		dialing the first channel of the next group.
	Default: SEQUENTIAL
CP_REGARD_TO	For use in the Avaya Environment.
_INCOMING_SETUP	If set to YES, the RMX calculates the line rate
_RATE	for incoming calls in CP conferences,
	according to the line rate which is declared by
	the endpoint in the H.225 setup message.
	If set to NO, the rate is calculated according to
	the conference line rate regardless of the rate
	in the H.225 setup message.
	Default: YES.
DELAY_BETWEEN	The delay in milliseconds that the MCU waits
_H320_DIAL_OUT	when connecting dial out ISDN and PSTN
_PARTY	participants.
(ISDN)	Default: 1000

17-19