Polycom 2000/4000 manual Maximum network jitter since the channel was

Polycom RMX 2000/4000 Administrator’s Guide

Table 9-9Participant Properties - Channel Status Parameters (Continued)

Field	Description
Channels Used	• Number of Packets – The number of received
(cont.)	or transmitted packets since the channel has
	opened. This field does not cause the display of
	the faulty indicator.
	• Jitter (Peak) – Displays the network jitter (the
	deviation in time between the packets) as
	reported in the last RTCP report (in
	milliseconds). Peak (in parentheses) reflects the
	maximum network jitter since the channel was
	opened.
	• Latency – Indicates the time it takes a packet to
	travel from one end to another in milliseconds
	(derived from the RTCP report).
Sync Status	Channel - The channel type: Video or Content.
	Source - The name of the participant currently
	viewed by this participant.
	Position - The video layout position indicating the
	place of each participant as they appear in a
	conference.
	Protocol Sync Loss - Indicates whether the system
	was able to synchronize the bits order according to
	the selected video protocol.
	Video Intra Sync - Indicates whether the
	synchronization on a video Intra frame was
	successful.
	Video Resolution - The video resolution of the
	participant.
Rx - Rate	The received line rate.
Tx - Rate	The transmitted line rate.
Tx - Video Sync	When checked, indicates a video synchronization
Loss	problem in the outgoing channel from the MCU.
	The counter indicates the sync-loss count.
Rx - Video Sync	When checked, indicates a video synchronization
Loss	problem in the incoming channel from the endpoint.
	The counter indicates the sync-loss count.

9-21