Polycom 2000/4000 manual 12-9

Polycom RMX 2000/4000 Administrator’s Guide

Table 2 Default Management Network Service – Routers (Continued)

Field	Description
Static Routes IPv4		The system uses Static Routes to
Only Table		search other networks for endpoint
		addresses that are not found on the
		local LAN.
		Up to five routers can be defined in
		addition to the Default Router. The
		order in which the routers appear in the
		list determines the order in which the
		system looks for the endpoints on the
		various networks. If the address is in
		the local subnet, no router is used.
		To define a static route (starting with
		the first), click the appropriate column
		and enter the required value.
	Router IP	Enter the IP address of the router.
	Address
	Remote	Enter the IP address of the entity to be
	IP	reached outside the local network. The
	Address	Remote Type determines whether this
		entity is a specific component (Host) or
		a network.
		• If Host is selected in the Remote
		Type field, enter the IP address of
		the endpoint.
		• If Network is selected in the
		Remote Type field, enter of the
		segment of the other network.
	Remote	Enter the subnet mask of the remote
	Subnet	network.
	Mask
	Remote	Select the type of router connection:
	Type	• Network – defines a connection to
		a router segment in another
		network.
		• Host – defines a direct connection
		to an endpoint found on another
		network.

12-9