Chapter 17-RMX Administration and Utilities
17-26
RMX_MANAGEMENT
_SECURITY
_PROTOCOL
Enter the protocol to be used for secure
communications.
Default: TLSV1_SSLV3 (both).
Default for U.S. Federal license s : TLSV1.
SIP_ENABLE_FECC
=NO By default, FECC support for SIP endpoints is
enabled at the MCU level. You can disable it
by manually adding this flag and setting it to
NO.
SIP_FAST_UPDATE_
INTERVAL_ENV Default se tting is 0 to prevent the RMX from
automatically sending an Intra request to all
SIP endpoints.
Enter n (where n is any number of seconds
other than 0) to let the RMX automatically
send an Intra request to all SIP endpoints
every n seconds.
It is recommended to set the flag to 0 and
modify the frequency in which the request is
sent at the endpoint level (as defined in the
next flag).
SIP_FAST_UPDATE_
INTERVAL_EP Default setting is 6 to let the RMX
automatically send an Intra request to
Microsoft OC endpoints only, every 6
seconds.
Enter any other number of seconds to change
the frequency in which the RMX send the Intra
request to Microsoft OC endpoints only.
Enter 0 to disable this behavior at the endpoint
level (not recommended).
Table 17-3 Manually Added System Flags – MCMS_PARAMETERS
(Continued)
Flag and Value Description