Polycom RMX 2000/4000 Administrator’s Guide

6Enter the IP address, Subnet mask and Default gateway for the workstation.

The workstation’s IP address should be in the same network neighborhood as the RMX’s Control Unit IP address.

Example: IP address – near 192.168.1.nn

None of the reserved IP addresses listed in Table G-1should be used for the IP Address.

The Subnet mask and Default gateway addresses should be the same as those for the RMX’s Management Network.

The addresses needed for connection to either the RMX’s Default Management Network or Alternate Management Network are listed in Table G-1.

For more information about connecting to the Alternate Management Network, see "Connecting to the Alternate Management Network” on page G-9.

G-5

Page 746
Image 746
Polycom 2000/4000 manual Example IP address near 192.168.1.nn