Polycom RMX 2000 Administrator’s Guide
17-49
Fixed Resource Capacity mode displays five sliders, one for each
resource type: Audio Only, CIF, SD, HD 720p 30fps, HD 1080p / HD
720p 60fps (HD 1080p / HD 720p 60fps resources are represented on
the same slider) where each type requires different number of video
resources (in CIF ports) for connecting endpoints.
—The first time the Fixed Resource Capacity is selected, all resources
are allocated to HD720p30 by default.
—If the allocation mode was previously Fixed or if it was Auto but
Fixed had been selected in the past, the previous resource
allocations in the mode are displayed.
The maximum number of allocatable of resources of each type for an
RMX containing two fully licensed MPM+ cards are as follows:
The MAX_CP_RESOLUTION flag setting does not affect resource
allocation.
Example: If it is set to SD30, the HD 1080p slider is still displayed and
HD 1080 resources can be allocated. However, HD 1080 participants
will connect at SD30 resolution.
Using the sliders, the administrator can manually allocate resources
to the various types of video resolutions and Audio Only connections
that can be used by connecting endpoints.
3Move the blue slider buttons to allocate resources.
As all the resources are allocated when the dialog box opens, you
must first free resources of one type by moving the blue slider button
to the left, and then move blue slider button of the required resource
type to the number of resources to be allocated.
Resource Type Maximum
Audio Only 800
CIF/VSW 160
SD 60
HD720p 40
HD1080p 20