Polycom RMX 2000/4000 Administrator’s Guide

Defining a SIP Network Service in the RMX

Your Polycom RMX 2000/4000 system should be installed according to standard installation procedures. See the Polycom RMX 2000/4000 Getting Started Guide, which describes how to set up and configure the MCU.

When configuring the Default IP Network Service on first entry, or when modifying the properties of the existing Default IP Network Service, the SIP environment parameters must be set as described in Defining a SIP Network Service in the RMX” on page 21.

To configure the RMX IP Network Service:

1Using the Web browser, connect to the RMX.

2In the RMX Management pane, expand the Rarely Used list and click IP Network Services ().

3In the IP Network Services pane, double-click the Default IP Service (, , or ) entry.

The Default IP Service - Networking IP dialog box opens.

H-21

Page 778
Image 778
Polycom 2000/4000 manual Defining a SIP Network Service in the RMX, To configure the RMX IP Network Service