Toshiba Strata CS manual Enabling and disabling hands-free answering

Your phone rings three times in a demonstration of that ring. Because the ring pattern derives from a continuous loop, the first one might be truncated. Listen for the subsequent rings to hear the pattern accurately.

4.Click OK.

Enabling and disabling hands-free answering

For an overview of hands-free answering, see “Using hands-free answering” on page 4-9. Use the following procedure to enable or disable hands-free answering from the Client:

1.On the main menu, click Tools > Options. The Options dialog box opens.

2.Click the Phone tab.

3.Select the Enable hands-free answering check box. Clear the check box to turn hands-free answering off.

4.Enter the desired time in the Dial tone time-out seconds. This setting identifies how long a dial tone plays after the end of a call before the station reverts to silence waiting for the next call. A setting of 0 indicates no dial tone, which means that the station reverts to silence as soon as a call ends.

5.Click OK.

Enabling and disabling voice-first answering

Note: Voice-first answering will not work when hands-free answering is also enabled.

For an overview of voice-first answering, see “Using voice-first answering” on page 4-10. Use the following procedure to enable or disable voice-first answering from the Client:

1.On the main menu, click Tools > Options. The Options dialog box opens.

2.Click the Phone tab.

3.Select the Enable voice-first answering check box. Clear the check box to turn voice-first answering off.

4.Click OK.

18-8 STRATA CS CLIENT USER GUIDE

BETA DOCUMENT - PRELIMINARY & CONFIDENTIAL