Lucent Technologies 6.1 manual Function Information

MERLIN LEGENDCommunications System Release 6.1		Issue 1
System Planning 555-661-112		August 1998
3 Lines/Trunks
	Identifying Line/Trunk Jacks	Page 3-10
	Function Information	3

If the system has a Voice Messaging System (such as Messaging 2000), you can use the Function column to indicate which service is available for those jacks. You can also use this column to indicate whether a jack connects a personal line and, therefore, has an owner.

Planning Form Instructions

In the Function column of Form 2c, do one of the following:

■If a jack is used for a special purpose, note the purpose. For example, if the system has Messaging 2000 with fax capability, indicate the service by writing one of the following for the appropriate jack:

—For Automated Attendant, write AA.

—For Call Answer, write CA.

—For Information Service, write IS.

—For Message Drop, write MD.

—For Voice Mail, write VM.

—For Fax Response, write FR.

■If a jack is used for a personal line, write the extension number of the telephone.

Proceed to the next section, “Selecting Line/Trunk Options.”