Lucent Technologies 6.1 manual Analog Direct-Line Console

MERLIN LEGENDCommunications System Release 6.1		Issue 1
System Planning 555-661-112		August 1998
3 Lines/Trunks
	Assigning Telephone Buttons	Page 3-63

DISPLAY CONSOLE WITH DSS

34 BUTTON

22 BUTTON

3			5	8	10	9	11		21	23	10	20	30	40
2			4	7	9	10	12		22	24	11	21	31	41
1			3	6	8	11	13		23	25	12	22	32	42
		Icom
	SA		2	5	7	12	14			26	13	23	33	43
	Voice								24
		Icom
	SA		1	4	6	13	15		25	27	14	24	34
	Ring													44
						14	16		26	28	15	25	35	45
						15	17		27	29	16	26	36	46
						16	18		28	30	17	27	37	47
						17	19		29	31	18	28	38	48
								Alarm
						18	20			32	19	29	39	49
									30
								Night					Conf
						19	21	Serv	31	33	Trnsfr	Recall		Drop
								Send/				Shift 2	Shift 3	Msg
						20	22	Remove		34	Shift 1			Stat
								Msg 32

Note: Alarm, Night Service, and Send/Remove Msg will be replaced with Lines 30, 31, and 32 if the system has that many lines.

Figure 3–7. Analog Direct-Line Console

NOTE:

If the system has more than 29 lines, Alarm, Night Service, and

Send/Remove Message are replaced with lines 30, 31, and 32.

The system assigns lines/trunks to buttons on DLCs in the order in which the lines/trunks are connected to the control unit. You can change the factory-set assignments by removing, adding, or changing the order in which lines/trunks are assigned to buttons for each DLC operator.

If the system has more than the number of factory-assigned lines/trunks to operator consoles, be sure to change the line/trunk assignment so that all lines/trunks you want answered by a DLC operator appear on at least one operator position.

Decide which lines/trunks should appear on each DLC operator console based on each operator’s call-handling responsibilities. All operators may not need the same assignments. DLC operators who are responsible for answering calls for specific groups usually need only the lines/trunks used by group members.