Lucent Technologies 6.1 manual Provision DN2 using the following translations

MERLIN LEGENDCommunications System Release 6.1		Issue 1
System Planning 555-661-112		August 1998
H NI-1 BRI Provisioning
Northern Telecom DMS-100 Switch Translations		Page H-20
Associate new DN with LTID using the NEW command:
SONUMBER	<<cr> or $>
DN	<enter DN>
LCC	<ISDNKSET>
GROUP	<enter group name>
SUBGRP	<enter subgrp value>
NCOS	<enter ncos value>
SNPA	<enter NXX value>
KEY	<1>
RINGING	<Y>
LATANAME	<enter value>
LTG	<enter value>
LEN_OR_LTID	<enter assigned value>
DMS-100 normally delivers the Calling Party Number and the Redirecting
Number, if available.
Attach LTIDs to LEN using the SLT command:
SONUMBER	<<cr> or $>
LTID	<enter value>
FUNCTION	<ATT>
LEN	<enter LEN to which LTID will be attached>

Provision DN2 using the following translations

Define a new Logical Terminal Identifier (LTID) using the SLT command:

SONUMBER<<cr> or $>

LTID	<enter identifier value>
FUNCTION		<ADD>
LTCLASS		<BRAFS>
CS		<Y>
PS		<N>
MAXKEYS		<64>
TEI_TYPE		<DTEI>
ABS		<NOPMD>
ABS		<$>
EKTS		<N>