Lucent Technologies 6.1 manual Customer Name Node Dial Plan information

MERLIN LEGEND R6 DESIGN IMPLEMENTATION GUIDE	(CONTINUED)
Customer Name: __________________________________	Node: ________

Dial Plan information:

Dial plan numbers for extensions, adjuncts, lines and calling groups must be unique across the network. Numbers will have to be changed if a conflict is encountered.

MERLIN LEGEND routes Non-Local UDP calls by matching number ranges entered

into the Non-Local UDP tables. These number ranges can consist of 2- to 4-digit numbers. 4-digit dial plans are recommended for MERLIN LEGEND. If a DEFINITY is in the network, and has a 5-digit dial plan, MERLIN LEGEND routes the call on 4-digits, but will send 5 digits.

Pool numbers and line numbers will be made unique across the network. This will be transparent to the customer.

- What extension range is desired for this location:	________________
(any additional extension ranges?)	________________
(does this range allow for growth?)	________________
	________________
- What adjunct range is desired for this location:	________________
(any additional extension ranges?)	________________
(does this range allow for growth?)	________________

Automatic Route Selection (ARS):

•It is strongly recommended that each system in the network have at least 1 local CO line for emergency use (i.e. 911 calls, power failure use, etc.).

•Traffic must be considered when routing ARS calls across the network, to assure that enough lines are available to handle call volume.

-ARS access code ____ The same ARS access code is recommended on all systems.

-Will ARS be used to access the facilities on another system on the network for making local calls _______ ? long distance calls _______ ?

-Will other systems on the network being using this systems ARS for making local calls _______ ? long distance calls _______ ?

-Have ARS tables been administered, or are only the default tables used?

Default only? _____ Other tables are used. _____

NOTE: There are additional engineering charges when Design Center engineers the custom ARS tables (1–16), i.e. TEHO. Consult with the assigned engineer.

3