![](/images/new-backgrounds/1320803/320803161x1.webp)
MERLIN LEGENDCommunications System Release 6.1 | Issue 1 |
System Planning | August 1998 |
|
|
2Control Unit Configuration
Numbering the System | Page |
1.On the Control Unit Diagram on Form 1, determine which extension jacks can be used as operator positions by circling the first and fifth extension jacks on digital or analog modules, until you have reached the maximum number of eight positions.
2.On Form 2a, mark the extension jacks to be used as additional operator positions.
3.Do one of the following:
■If the system has additional QCCs, proceed to Step 4.
■If the system has additional DLCs, skip to Step 5.
4.For each additional QCC:
■Write QCC next to the preprinted logical ID for each additional QCC position. Be sure to assign QCCs to only the first and fifth extension jacks on each digital module.
■Write the name or location of each additional QCC operator in the Person, Location, or Function column.
■On Form 1 (page 2), write the extension number of each additional QCC in the System Consoles box.
5.For each additional DLC:
■Write DLC next to the preprinted logical ID for each additional DLC position, including DLC positions used for calling group supervisors and for the optional CMSs. Be sure to assign DLCs to only the first and fifth extension jacks on each digital or analog module.
■Write the name or location of each additional DLC operator in the Person, Location, or Function column.
■On Form 1 (page 2), write the extension number of each additional DLC in the System Consoles box.
6.If the system includes any Call Management Systems, write CMS in the Person, Location, or Function column next to the logical ID for the two DLC positions assigned for each CMS.
Proceed to the next section, “Extension Jack Pairs for Analog Telephones”.