![](/images/new-backgrounds/1320803/320803967x1.webp)
MERLIN LEGENDCommunications System Release 6.1 | Issue 1 |
System Planning | August 1998 |
G | Page |
| |
|
|
The programming for Multiline Hunt is CO switch dependent. The Lucent Technologies 5ESS and Siemens SSC EWSD switches provide hunting through the Series Completion feature. The Northern Telecom
The MERLIN LEGEND has currently been tested with each switch type in the following configurations:
—Lucent Technologies 5ESS in a linear hunt group
—Northern Telecom
—Siemens SSC EWSD in a circular hunt group
Other configurations are possible, but are not guaranteed to work.
Appendix H,
11.Once you have determined your Service Configuration, do one of the following:
■If your Service Configuration will be IOC “S”, check the box beside the IOC “S” selection under the Service Configuration heading, then enter the number of BRI lines that will be provisioned using this package.
■If your Service Configuration will be MLH, check the box beside the MLH selection under the Service Configurations heading.
—Check the box for MLHG (Northern Telecom
—Enter the total number of BRI lines provisioned using MLH, the number of BRI lines provisioned as voice only hunt groups, the number of BRI lines provisioned as data only hunt groups, and the number of BRI lines provisioned as voice/data hunt groups in the spaces provided.
NOTE:
MERLIN LEGEND Release 4.0 does not support voice/data hunt groups with the Siemens SSC EWSD CO switch.
12.Specify the total number of BRI lines under the Number of BRI Lines Ordered heading.
13.If CPN/BN is available with the BRI lines ordered, check the CPN/BN box under the Additional Features heading.
14.Make a copy of the