Lucent Technologies 6.1 manual Form 3f Automatic Route Selection Tables, Subpatterns

MERLIN LEGENDCommunications System Release 6.1		Issue 1
System Planning 555-661-112		August 1998
4 Features
	System Features	Page 4-66

Form 3f

Automatic Route Selection Tables*

Maximum: 16 Tables. (Make a copy for each table.)

Table No. 7

Type of Table

❑6-Digit

❑Area Code

❑Exchange

❑1 + 7, dialing from

❑within area code

❑not within area code ✦

Area Code/Exchanges
001	413	021	041	061	081
002	617	022	042	062			082
003	203	023	043	063			083
004	508	024	044	064		084
005	401	025	045	065			085
006	516	026	046	066			086
007	518	027	047	067			087
008	914	028	048	068			088
009	717	029	049	069			089
010	201	030	050	070			090
011	603	031	051	071				091
012	207	032	052	072			092
013	215	033	053	073	093
014	802	034	054	074
015	609	035	055
016		036
017		037
018
019
Figure 4–3.		Example 2: Form 3f, Area Code Table
Subpatterns				4

For each table (1 through 16, and factory-set Tables 17 and 18), you can select two subpatterns (A and B) that specify routes to be used at different times. You can specify up to six routes for each subpattern. For example, you may want calls to certain area codes routed over WATS lines/trunks during the day; after 11 p.m., when toll rates are less expensive on basic lines/trunks, you may want the calls routed over the main pool.