Lucent Technologies 6.1 Identifying Line/Trunk Jacks, Module Types and Line/Trunk Jack Types

MERLIN LEGENDCommunications System Release 6.1			Issue 1
System Planning 555-661-112			August 1998
3 Lines/Trunks
	Identifying Line/Trunk Jacks		Page 3-2
	Identifying Line/Trunk Jacks	3

Identifying line/trunk jacks consists of the following tasks:

1.Determining which line/trunk jack types are available according to the types of modules in the control unit

2.Matching incoming trunks to the jacks that support them

3.Designating jacks for auxiliary equipment (if any)

This section contains instructions for completing all of these tasks.

Forms Needed

■Form 1, System Planning

■Form 2c, System Numbering: Line/Trunk Jacks

You also need the local telephone company’s line/trunk information.

Module Types and Line/Trunk Jack Types 3

The line/trunk jack type is determined by the type of module. Table 3–1 lists the line/trunk jack types and the incoming line/trunk or auxiliary equipment that can be connected to these jacks.