Lucent Technologies 6.1 manual B8ZS

MERLIN LEGENDCommunications System Release 6.1		Issue 1
System Planning 555-661-112	August 1998
Glossary
	Page GL-3
AT&T Switched	See ASN.
Network
AUDIX Voice	A voice-processing application, part of IS II/III, that provides
Power	Automated Attendant, Call Answer, Information Service,
	Message Drop, Voice Mail, and, optionally, Fax Attendant
	System for use with the system.
Automated	IS II/III, MERLIN LEGEND Mail, and Lucent Technologies
Attendant	Attendant application that automatically answers incoming
	calls with a recorded announcement and directs callers to a
	department, an extension, or the system operator.
Automated	See ADDS.
Document Delivery
System
automatic	Process that occurs in private network when all available
immediate cycling	routes for a call specify systems with matching switch
	identifiers. The call is routed from the originating system to
	the destination system and back to the originating system
	in a continuous loop. Switch identifiers labelling systems
	must be unique across a network.
Automatic Line	See ALS.
Selection
Automatic Number	See ANI.
Identification
automatic	See automatic-start tie trunk.
ringdown tie-trunk
Automatic Route	See ARS.
Selection
automatic-start tie	Tie trunk on which incoming calls are routed to an operator
trunk	or other designated destination without a start signal, as
	soon as the trunk is seized; the destination is specified
	during programming. Also called “automatic ringdown” or
	“auto-in” tie trunk.
auxiliary power	Device that provides additional power to the system.
unit

B

B8ZS	(bipolar 8 zero substitution) Line-coding format that
	encodes a string of eight zeros in a unique binary sequence
	to detect bipolar violations.
backup	Procedure for saving a copy of system programming onto a
	floppy disk or memory card. See also restore.
bandwidth	Difference, expressed in hertz, between the highest and
	lowest frequencies in a range that determines channel
	capacity.